Domestic drain jetting uses high-pressure water to clean and clear the drains in a home. A jetting unit pumps water through a flexible hose with a rotating nozzle. The nozzle scours the inside of the pipe and removes grease, scale, root fragments, silt and general debris. Jetting works on common household pipe types, including clay, plastic and cast iron, and we adjust the pressure to suit the pipe and its condition. Unlike chemical drain cleaners, jetting removes deposits from the pipe walls instead of dissolving a narrow channel through them. As a result, the clean is more thorough and lasts longer. It also uses only water, so no chemicals enter the drain. You can book jetting to clear a blockage or as regular upkeep. Many owners book it each year, especially if they have had blockages before or have mature trees near the drain. A typical visit takes one to two hours.
We inspect your drain access points. Where it suits the job, we run a brief CCTV check, because this shows the pipe condition. It also shows which areas need the most attention.
We position our jetting unit and feed the hose into the drain through the best access point. We then choose the right nozzle and pressure for your pipe material. This protects the pipe while we clean it, since each material has its own limit.
We push the nozzle through the pipe and clean from the problem area back towards the access point. The rotating water jets scour the pipe walls, while they flush loose debris downstream. Because we work in one direction, the debris does not settle again.
We run water through the system to confirm full flow is back. Where the job includes it, we also run a final CCTV check. That way you can see the difference before and after, since the camera shows the clean pipe.
The cost of domestic drain jetting in the Reading area depends on the length of drain and how much build-up we must remove. Routine upkeep jetting on a standard home is usually more straightforward than clearing heavy build-up. We confirm the price before we start, and there is no call-out fee. Request a fast, fixed-price quote online, because that way you know the cost in advance.
Yes, when a professional does it. We adjust the water pressure to match your pipe material and condition, with lower pressure for older clay pipes and higher pressure for modern plastic. Because a brief CCTV check comes first, we know the pipe is sound enough for jetting.
For most homes, jetting once a year keeps drains in good condition. Homes with mature trees near the drain, or those prone to grease build-up, may need jetting every six to twelve months. We advise a suitable schedule based on what we find during the clean.
No, because we do all the work through existing access points, such as manholes, inspection chambers and gullies. We do not need to dig or lift any surfaces. The jetting unit is compact, so we can set it up on a driveway or in a garden without damage.
These guides explain the basics, because knowing the cause helps you pick the right fix.